Troubleshooting Internet Rebooter Connection Issues
Fix a Rebooter that shows offline, keeps rebooting your modem, or won’t add in the ConnectSense app.
Problem 1: The Rebooter Keeps Rebooting or Never Comes Back Online After a Reboot
Your modem/router may need more time to reconnect before the Rebooter checks the internet again.
- Plug your modem/router directly into the wall outlet.
- Plug the Rebooter into a separate outlet so it can come back online.
- In the ConnectSense app, open the Rebooter settings.
- If Intelligent Reboot is on (it's on by default), increase the Detection Time. The default is 2 minutes. A longer time gives your modem/router more time to restart.
- Once it's working, move the Rebooter back between the wall outlet and your modem/router.
Still having issues? Try scheduling a daily reboot. Many customers see far fewer internet outages when their modem/router restarts once a day. Intelligent Reboot then works as a backup.
If none of this works, see Advanced Network Troubleshooting below.
Problem 2: The Rebooter Shows Offline After a While and Never Recovers
Something on your local network is likely blocking the Rebooter's connection to the ConnectSense cloud.
- Try scheduling a daily reboot. Many customers see a more stable connection and fewer devices dropping offline.
- If that doesn't help, see Advanced Network Troubleshooting below.
Problem 3: You Can't Add the Rebooter in the ConnectSense App
Start fresh:
- Factory reset the Rebooter. Hold the button for 15 seconds, then release. (How to Reset the Rebooter)
- Check your device list in the ConnectSense app. If the Rebooter is already there, remove it.
Set up the power correctly:
3. Keep your modem/router plugged directly into the wall outlet.
4. Plug the Rebooter into a separate outlet, with nothing plugged into it.
Run setup again:
5. Connect your phone to a 2.4 GHz Wi-Fi network with internet before tapping +.
6. Select Rebooter from the device list.
7. Scan the QR code. If it doesn't work, check that the ConnectSense app has camera permission. You can also tap Not able to scan QR code? to add it manually.
8. When you see a list of Wi-Fi networks, your phone is talking to the Rebooter. Choose your 2.4 GHz network and enter the correct password.
If setup fails at the Wi-Fi step, one of two things is likely:
- The Wi-Fi password was typed wrong. Try again.
- Your network is blocking the ConnectSense cloud. See Advanced Network Troubleshooting below.
Stuck on "Updating Firmware"? Close the ConnectSense app and open it again. The Rebooter should already be added and show up in your device list.
Full setup steps: How to Set Up the Rebooter
Advanced Network Troubleshooting
If you're comfortable with your router settings, check the following:
1. Router features that can block traffic
Check your router's QoS, ad blocking, and firewall settings. Any of these can interfere with the Rebooter.
2. Internet check sites
The Rebooter pings these sites to check your internet. Make sure they aren't blocked:
- google.com
- facebook.com
- wikipedia.org
- amazon.com
- baidu.com
3. ConnectSense cloud
Make sure this address is reachable on TCP ports 8883 and 443:aya7x6d6hjbw2-ats.iot.us-east-1.amazonaws.com
4. Time servers (NTP)
Make sure these are reachable:
- pool.ntp.org
- time.windows.com
- time.nist.gov
5. DNS
Some internet provider DNS servers are unreliable. If you have doubts, change the DNS in your router settings to Google's: 8.8.8.8
6. Try a guest network
Some routers have security features that block smart home devices. Setting up the Rebooter on your router's guest network can help. It also keeps smart devices separate from your phones and computers, which is better for security.
Still need help? Contact our support team.