Skip to content
Submit a ticket
Open main navigation
Close main navigation
Submit a ticket
How can we help you?
There are no suggestions because the search field is empty.
Grid Connect
Grid Connect Products
Grid Connect Products
Device Installer
Web page configuration settings do not take effect
Device Installer
Com Port
Com Port Redirector
GRIDBluFly
GRIDBluFly Setup Guide for Serial Bluetooth Communication
Migrating from FireFly to GRIDBluFly? Try these settings
NET485-01
How to wire the Net485 / Net485-MB for Half-Duplex RS485
How to set up 2 Net485 units in a serial tunnel (Serial over TCP/IP)
Tunnel Testing one (1) NET485 Device via Ethernet
Tunnel Testing Two (2) NET485 Devices
Tunnel Testing one (1) NET485 Device with CPR Manager
Serial to Ethernet
Cannot find device in Device Installer search
Connect to Ethernet through a Com Port with Com Port Redirector (CPR) Software
Device Not Found? How to Access a NET232/NET485 with Different Subnets
ERROR_LINE_NOT_FOUND in CPR software
Comparison of the NET232+ to the NET232
Serial over Bluetooth
What does the red LED indicate?
Factory Reset using DIP Switches
Pairing two Bluetooth devices
Accessing the Configuration Menu
Bluetooth Dongle - Set Up summary Page and Download
xPort
XPort Documentation
CAN
CAN 2 Meter Cable Diagram
CAN Bus Terminator - Pin Layout and Dimensions
GC CAN WIFI Tunnel Configuration
NET485-MB
Choosing the Connect Protocol
NET485-MB ModbusTCP Gateway - Initial Configuration Using Lantronix DeviceInstaller
WI232+
Creating a wireless serial tunnel
NET232+
Tunnel Testing one (1) NET232+ Device via Ethernet
Tunnel Testing Two (2) NET232+ Devices
Tunnel Testing one (1) NET232+ Device with CPR Manager
Testing and Evaluation
Test RS232 Devices Using a Single Ethernet Port (Loop-back)
Create a tunnel with one device
